For applications that do not require the temperature capabilities of a CA sensor, this series provides a more cost-effective and easier to install solution.

Designed for the long-term measurement and monitoring of absolute vibration in harsh environments, such as gas or steam turbines, compressors, pumps and fans.

Key features:

  • Available in standard versions and in Ex versions certified for use in hazardous areas.
  • Signal conditioning: attached or integrated electronics.
    Note: No external signal conditioner, so no connectors close to the machinery being monitored and easier to install.
  • High-temperature environments and low-frequency applications.
  • CE134 piezoelectric accelerometer
    • CE134 piezoelectric accelerometer
    • CE134 piezoelectric accelerometer
      • Designed for the long-term measurement of vibration in severe environments, such as gas turbines and compressors
      • Wide temperature range: −55 to 350 °C
      • High frequency response: up to 10000 Hz
      • Current output (5 µA/g) for signal transmission over long distances: up to 1000 m
      • Certified for use in potentially explosive atmospheres
    Compare
  • CE281 piezoelectric accelerometer
    • CE281 piezoelectric accelerometer
    • CE281 piezoelectric accelerometer
      • Designed for the long-term measurement of vibration in severe environments, such as gearboxes, compressors, pumps and fans
      • Wide temperature range: −55 to 260 °C
      • High frequency response: up to 7000 Hz
      • Current output (10 µA/g) for signal transmission over long distances: up to 1000 m
      • Certified for use in potentially explosive atmospheres
    Compare
  • CE311 piezoelectric accelerometer
    • CE311 piezoelectric accelerometer
    • CE311 piezoelectric accelerometer
      • Designed for the long-term measurement of vibration in severe environments, such as heavy-duty gas turbines and steam turbines
      • High frequency response: up to 8000 Hz
      • High sensitivity: 50 µA/g
      • Current output (50 µA/g) for signal transmission over long distances: up to 1000 m
      • Certified for use in potentially explosive atmospheres
    Compare
  • CE620 piezoelectric accelerometer
    • CE620 piezoelectric accelerometer
    • CE620 piezoelectric accelerometer
      • Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
      • Industry standard IEPE (integrated electronics piezo electric) vibration sensor
      • Dynamic voltage output signal (100 or 500 mV/g) suitable for spectral analysis
      • Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
      • IP68 protection rating
    Compare
  • CE630 piezoelectric accelerometer
    • CE630 piezoelectric accelerometer
    • CE630 piezoelectric accelerometer
      • Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
      • Industry standard IEPE (integrated electronics piezo electric) vibration sensor
      • Dynamic voltage output signal (100 or 500 mV/g) suitable for spectral analysis
      • Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
      • IP68 protection rating, side connector
    Compare
  • CE687 piezoelectric accelerometer
    • CE687 piezoelectric accelerometer
    • CE687 piezoelectric accelerometer
      • Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
      • Industry standard 4 to 20 mA loop-powered vibration sensor (vibration transmitter)
      • Quasi-static output signal (4 to 20 mA proportional to 0 to 10 or 0 or 20 g) indicating “overall” vibration
      • Typically connected to a machinery monitoring system for protection applications and/or a control system such as a DCS or PLC for monitoring and/or control applications
      • IP68 protection rating
    Compare
  • PV660 piezoelectric velocity sensor
    • PV660 piezoelectric velocity sensor
    • PV660 piezoelectric velocity sensor
      • Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
      • Industry standard IEPE (integrated electronics piezo electric) vibration sensor
      • Dynamic voltage output signal (4 mV/mm/s) suitable for spectral analysis
      • Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
      • IP68 protection rating
    Compare
  • PV685 piezoelectric velocity sensor
    • PV685 piezoelectric velocity sensor
    • PV685 piezoelectric velocity sensor
      • Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
      • Industry standard 4 to 20 mA loop-powered vibration sensor (vibration transmitter)
      • Quasi-static output signal (4 to 20 mA proportional to 0 to 20, 0 to 25, or 0 to 50 mm/s) indicating “overall” vibration
      • Typically connected to a machinery monitoring system for protection applications and/or a control system such as a DCS or PLC for monitoring and/or control applications
      • IP68 protection rating
    Compare
  • SE120 piezoresistive accelerometer
    • SE120 piezoresistive accelerometer
    • SE120 piezoresistive accelerometer
      • Designed for the long-term measurement of vibration in harsh environments, such as hydro turbines and fans (lower-speed machines)
      • Low frequency response: 0.2 to 350 Hz
      • Current output (2 mA/g) for signal transmission over long distances: up to 1000 m
    Compare