• VM600 AMC8 analog monitoring card
    • Out of Stock
      VM600 AMC8 analog monitoring card
    • VM600 AMC8 analog monitoring card
    • These cards are being phased out with spares available until 2027.
      – VM600: no replacement.
      – VM600Mk2: replacement module available 2024-2025.

      • 8 temperature or process monitoring channels
      • 1 processed output per channel and 1 processed output per multi-channel (4 per AMC8)
      • Highly configurable card supports temperature monitoring using thermocouples and/or RTDs, and process monitoring using current and/or voltage inputs
      • Highly integrated card pair (with IOC8T) includes DC outputs, relays and serial communications interfaces
      • Designed for operation with the VM600 MPSx software
    Compare
  • VM600 CPUM modular CPU card
    • Out of Stock
      VM600 CPUM modular CPU card
    • VM600 CPUM modular CPU card
    • These cards are discontinued with spares no longer available. Please see below for an updated alternative.
      – VM600: replaced by CPUR2 and IOCR2.
      – VM600Mk2: replaced by CPUMMk2 + IOCNMk2.

    Compare
  • VM600 CPUR rack controller and communications interface card
    • Out of Stock
      VM600 CPUR rack controller and communications interface card
    • VM600 CPUR rack controller and communications interface card
    • These cards are discontinued with some spares available.
      – VM600: no replacement.
      – VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.

      • VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
      • “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
      • Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
      • Five output relays to signal system statuses and alarms
      • VM600 system event and measurement event logs available via VibroSight® software
    Compare
  • VM600 CPUR2 rack controller and communications interface card
    • VM600 CPUR2 rack controller and communications interface card
    • VM600 CPUR2 rack controller and communications interface card
      • VM600 CPUR2/IOCR2 rack controller and communications interface card pair with support for Modbus TCP and PROFIBUS DP
      • “One-Shot” configuration management of protection cards (MPC4) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
      • Mathematical processing of data to be shared via fieldbus and card pair status (health) information via fieldbus
      • Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUR2) security with a removable key
      • Two output relays to signal system statuses and alarms
    Compare
  • VM600 IOC4T input/output card for MPC4 cards
    • Out of Stock
      VM600 IOC4T input/output card for MPC4 cards
    • VM600 IOC4T input/output card for MPC4 cards
    • These cards are being phased out with spares available until 2027.
      – VM600: no replacement.
      – VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.

      • Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
      • Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
      • Differential buffered (raw) transducer output per dynamic channel
      • DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
      • 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
    Compare
  • VM600 IOC8T input/output card for AMC8 card
    • Out of Stock
      VM600 IOC8T input/output card for AMC8 card
    • VM600 IOC8T input/output card for AMC8 card
    • These cards are being phased out with spares available until 2027.
      VM600: no replacement.
      VM600Mk2: replacement module available 2024-2025.

      • Input/output (interface) card for an AMC8 card – supports 8 temperature or process monitoring channels
      • Configurable signal input with current source output per monitoring channel
      • DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per monitoring channel
      • 4 configurable relays with three contacts available per relay, and alarm reset (AR) and danger bypass (DB) control inputs
    Compare
  • VM600 IOCN input/output card for CPUM card
    • Out of Stock
      VM600 IOCN input/output card for CPUM card
    • VM600 IOCN input/output card for CPUM card
    • These cards are discontinued with spares no longer available, please see below for an updated alternative.
      – VM600: replaced by CPUR2 and IOCR2.
      – VM600Mk2: replaced by CPUMMk2 + IOCNMk2.

      • Input/output (interface) card for CPUM card
      • One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
      • One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
      • One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
      • Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
    Compare
  • VM600 IOCR input/output card for CPUR card
    • Out of Stock
      VM600 IOCR input/output card for CPUR card
    • VM600 IOCR input/output card for CPUR card
    • These cards are discontinued with some spares available, please see below for an updated alternative.
      – VM600: there is no replacement.
      – VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.

      • Input/output (interface) card for CPUR card
    Compare
  • VM600 IOCR2 input/output card for CPUR2 card
    Compare
  • VM600 IRC4 intelligent relay card
    • Out of Stock
      VM600 IRC4 intelligent relay card
    • VM600 IRC4 intelligent relay card
    • This card is discontinued with spares no longer available.
      – VM600: no replacement.
      – VM600Mk2: no replacement.

      • Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
      • 8 relays configurable as 8 SPDT or 4 DPDT
      • Fully software configurable using the IRC4 Configurator software
      • Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
      • All relay contacts are available on the screw-terminal connectors
    Compare
  • VM600 machinery protection system software (MPS1 and MPS2)
    • Out of Stock
      VM600 machinery protection system software (MPS1 and MPS2)
    • VM600 machinery protection system software (MPS1 and MPS2)
    • This software is discontinued (no longer under active development).
      – VM600: no replacement.
      – VM600Mk2: replaced by VibroSight® software.

      • MPS1 for configuration and MPS2 for configuration and trending
      • Live data (MPS1 and MPS2) and historical data (MPS2 only)
      • Graphical user interface
      • Runs on Windows® Server 2003, Windows NT, Windows 2000, Windows XP, Windows Vista, Windows 7 and Windows 10 operating systems
      • Available in 3 languages (English, French, German)
    Compare
  • VM600 MPC4 machinery protection card
    • Out of Stock
      VM600 MPC4 machinery protection card
    • VM600 MPC4 machinery protection card
    • These cards are being phased out with spares available until 2027.
      – VM600: no replacement.
      – VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.

      • 4 dynamic channels and 2 tachometer channels
      • 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4), 1 processed output per tacho channel
      • Highly configurable card supports all measurements required by machinery protection applications, such as relative and/or absolute vibration
      • Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
      • Designed for operation with the VM600 MPSx software
    Compare
  • VM600 MPC4SIL machinery protection card
    • VM600 MPC4SIL machinery protection card
    • VM600 MPC4SIL machinery protection card
      • 4 dynamic channels
      • 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4)
      • Highly configurable card supports a subset of SIL 1 approved measurements for machinery protection, including relative and/or absolute vibration
      • Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
      • Designed for operation with the VM600 MPSx software
    Compare
  • VM600 RLC16 relay card
    • Out of Stock
      VM600 RLC16 relay card
    • VM600 RLC16 relay card
    • This card is being phased out with spares available until 2027.
      – VM600: no replacement.
      – VM600Mk2: replaced by RLC16Mk2.

      • Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
      • 16 SPDT relays
      • Hardware configurable
      • Relays configurable as normally energised (NE) or normally de-energised (NDE)
      • All relay contacts are available on the screw-terminal connectors
    Compare
  • VM600 XIO16T input/output module for XMx16 modules
    • VM600 XIO16T input/output module for XMx16 modules
    • VM600 XIO16T input/output module for XMx16 modules
    • These cards are still available with phase out planned for 2025.
      – VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.

      Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.

      • Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
      • Differential signal input per dynamic channel and tachometer channel
      • Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
    Compare