EC222 cable assembly
- High-quality, reliable cable assembly for CA280 vibration systems
- K221 low-noise cable with Teflon PFA outer sheath (Ø 4.8 mm)
- Threaded connector (CG505 type) to flying leads
- 2-wire, with shield
Description
High-quality, high-reliability cable assembly for use with CA280 vibration sensors (accelerometers using external signal conditioners).
For use in harsh environments characterised by high temperatures and/or hazardous areas (potentially explosive atmospheres).
Note: While the EC222 cable assembly and the EC119 cable assembly are similar, the EC222 has less protection and one shield.
Features
- High-quality, reliable cable assembly for CA280 vibration systems
- K221 low-noise cable with Teflon PFA outer sheath (Ø 4.8 mm)
- Threaded connector (CG505 type) to flying leads
- 2-wire, with shield
Additional information
| Measurement system | CA vibration |
|---|---|
| Sensor | CA accelerometers |
| Signal conditioner | IPC704 |
| Length | From 19.7 in (in steps of 19.7 in) | From 500 mm (in steps of 500 mm) |
The following downloads are available for this product:
Related products
-
-
- CA134 piezoelectric accelerometer
Designed for the long-term measurement of vibration over wide temperature ranges in extreme environments, such as gas turbines or cryogenic applications
- Operating temperature: −54 to 500 °C, −253 (20 K) to 500 °C for cryogenic version
- Frequency response: 0.5 to 6000 Hz
- Available as a sensor only (no integral cable) or with an integral mineral-insulated (MI) with a double braid
- Certified for use in potentially explosive atmospheres
-
-
-
- TQ442 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 2 or 4 mm measurement range (Ø8 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 0.5, 1.0, 1.5, 2.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-
-
-
- CP211 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- Very high operating temperature: up to 650 °C (1202 °F)
- Very high frequency response: up to 15000 Hz
- Available in different integral mineral-insulated (MI) cable lengths, terminated with either a high-temperature connector or a LEMO connector
- Certified for use in potentially explosive atmospheres
-
-
-
- TQ403 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 12 mm measurement range (Ø18 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-