ED120 cable assembly
- Very high-quality, reliable cable assembly for CV213 velocity measurement systems
- K220 cable with PTFE insulation (Ø 3.9 mm) or K225 cable with PTFE insulation (Ø 3.2 mm)
- 2-wire, with shield
- Threaded connector (MIL-C-5015 type) to flying leads
Description
High-quality, high-reliability cable assembly for use with a CV213 velocity transducer.
Features
- Very high-quality, reliable cable assembly for CV213 velocity measurement systems
- K220 cable with PTFE insulation (Ø 3.9 mm) or K225 cable with PTFE insulation (Ø 3.2 mm)
- 2-wire, with shield
- Threaded connector (MIL-C-5015 type) to flying leads
Additional information
| Measurement system | CV213 velocity |
|---|---|
| Sensor | CV213 |
| Operating temperature range | −85 to 399 °F | −65 to 204 °C |
| Length | From 19.7 in (in steps of 19.7 in) | From 500 mm (in steps of 500 mm) |
| Protection | Optional flexible stainless steel hose |
The following downloads are available for this product:
Related products
-
-
- LS120 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 5 to 30 mm linear measurement range (1.875 to 33.125 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
-
-
-
- TQ432 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 2 or 4 mm measurement range (Ø12.7 mm sensor)
- −25 to 140 °C operating temperature, IP68 protection rating, 100 bar pressure rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-
-
-
- LS121 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 20 to 60 mm linear measurement range (15 to 65 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
-
-
-
- AE119 housing expansion probe
- Designed for the long-term measurement of housing expansion in extreme environments, such as gas turbines and steam turbines
- 50 or 100 mm measurement range
- 0 to 80 °C (32 to 176 °F) operating temperature, IP54 protection rating
- Integrated electronics
- Current loop output (4 to 20 mA) for signal transmission over long distances
-