CV211
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −65 to 120 °C
- Voltage output (23 mV/mm/s)
- Certified for use in potentially explosive atmospheres
Description
23 mV/mm/s, −65 to 120 °C, 10 to 1000 Hz.
The CV211 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element providing a voltage output that is directly proportional to the vibration velocity.
The CV211 is designed and built for use in harsh environments characterised by typical temperatures, damp and corrosive environments, and/or hazardous areas (potentially explosive atmospheres).
Features
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −65 to 120 °C
- Voltage output (23 mV/mm/s)
- Certified for use in potentially explosive atmospheres
The following downloads are available for this product:
Related products
-
-
- CV213 velocity transducer
- Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Wide temperature range: −29 to 204 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
-
-
- CV214 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −29 to 121 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
-
-
- VE210 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Very low frequency response: down to 0.5 Hz
- Temperature range: −25 to 80 °C
- Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
- Any mounting orientation
-
Related products
-
-
- CP211 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- Very high operating temperature: up to 650 °C (1202 °F)
- Very high frequency response: up to 15000 Hz
- Available in different integral mineral-insulated (MI) cable lengths, terminated with either a high-temperature connector or a LEMO connector
- Certified for use in potentially explosive atmospheres
-
-
-
- TQ403 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 12 mm measurement range (Ø18 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-
-
-
- PA153 probe mounting adaptor
- Probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 200 °C temperature, IP65 protection rating
-
-
-
- PA150 probe mounting adaptor with proximity measurement chain
- Removable probe housing and probe adaptor rod containing a complete proximity measurement chain (TQ912 and IQS900)
- 2 or 4 mm measurement range (Ø8.2 mm sensor)
- Sealed die-cast aluminium housing and stainless steel adaptor rod, with choice of mounting orientation
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- Certified for use in potentially explosive atmospheres
-