CV213 velocity transducer
- Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Wide temperature range: −29 to 204 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
Description
20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.
The CV213 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element providing a voltage output that is directly proportional to the vibration velocity.
The CV213 is designed and built for use in harsh environments characterised by higher temperatures, damp and corrosive environments, and/or hazardous areas (potentially explosive atmospheres).
Features
- Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Wide temperature range: −29 to 204 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
Additional information
| Output type | Voltage (2-wire) |
|---|---|
| Sensitivity | 508 mV/in/s | 20 mV/mm/s |
| Operating temperature range | −20 to 399 °F | −29 to 204 °C |
| Frequency response | 10 to 1000 Hz |
| Sensitivity tolerance | ±5% |
| Dynamic measurement range | 39.4 in/s | 1000 mm/s |
| Transverse sensitivity | ±10% max. |
| Resonant frequency | 10 Hz ±1 Hz |
| Mounting orientation | ±100° of vertical |
| Protection rating | IP64 |
| Hazardous area certifications | Ex ia |
The following downloads are available for this product:
- CV213 and CV214 velocity transducers data sheet
- KEMA 04 ATEX 1178 X Ex certificate (Europe) – CV21x
- cCSAus 1560547 Ex certificate (North America) – CV21x
- KGS 18-GA4BO-0389X Ex certificate (South Korea) – CV21x
- EAЭC RU C-CH.AД07.B.03024/21 Ex certificate (Russian Federation) – CV21x
- 110-213-000D012 product drawing [ LOGIN required ]
- Vibration measurement chains using CVxxx or VExxx velocity sensors installation manual [ LOGIN required ]
Related products
-
-
- CV214 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −29 to 121 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
-
-
- VE210 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Very low frequency response: down to 0.5 Hz
- Temperature range: −25 to 80 °C
- Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
- Any mounting orientation
-
-
-
- CV211
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −65 to 120 °C
- Voltage output (23 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
Related products
-
-
- CE620 piezoelectric accelerometer
- Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
- Industry standard IEPE (integrated electronics piezo electric) vibration sensor
- Dynamic voltage output signal (100 or 500 mV/g) suitable for spectral analysis
- Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
- IP68 protection rating
-
-
-
- CP103 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- High sensitivity: 232 pC/bar
- Very high operating temperature: up to 650 °C
- Available in different integral mineral-insulated (MI) cable lengths, terminated with either a high-temperature connector or a LEMO connector
- Certified for use in potentially explosive atmospheres
-
-
-
- TQ432 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 2 or 4 mm measurement range (Ø12.7 mm sensor)
- −25 to 140 °C operating temperature, IP68 protection rating, 100 bar pressure rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-
-
-
- CA280 piezoelectric accelerometer
Designed for the long-term measurement of vibration in extreme environments, such as gas turbines, gearboxes and compressors
- Operating temperature: −60 to 260 °C
- Frequency response: 0.5 to 6000 Hz
- Available as a sensor only (no integral cable) or with an integral soft-line cable with a flexible stainless steel hose
- Certified for use in potentially explosive atmospheres
-
