VE210 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Very low frequency response: down to 0.5 Hz
- Temperature range: −25 to 80 °C
- Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
- Any mounting orientation
Description
50 µA/mm/s or 50 mV/mm/s, −25 to 80 °C, 0.5 to 400 Hz.
The VE210 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element and integrated electronics with lineariser (for low-frequency measurements) providing a current output or a voltage output that is directly proportional to the vibration velocity.
The VE210 is designed and built for use in harsh environments characterised by typical temperatures in damp and corrosive environments.
Features
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Very low frequency response: down to 0.5 Hz
- Temperature range: −25 to 80 °C
- Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
- Any mounting orientation
Additional information
Output type | Current (2-wire) or voltage (3-wire) |
---|---|
Sensitivity | 1270 µA/in/s or 1270 mV/in/s | 50 µA/mm/s or 50 mV/mm/s |
Operating temperature range | −13 to 176 °F | −25 to 80 °C |
Frequency response | 0.5 to 400 Hz |
Sensitivity tolerance | ±5% |
Dynamic measurement range | 3.94 in/s | 100 mm/s |
Linearity | ±1% and ±2% |
Transverse sensitivity | 5% max. |
Mounting orientation | No restrictions |
Protection rating | IP68 |
The following downloads are available for this product:
Related products
-
- CV214 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −29 to 121 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
- CV213 velocity transducer
- Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Wide temperature range: −29 to 204 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
- CV211
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −65 to 120 °C
- Voltage output (23 mV/mm/s)
- Certified for use in potentially explosive atmospheres