PV660 piezoelectric velocity sensor
- Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
- Industry standard IEPE (integrated electronics piezo electric) vibration sensor
- Dynamic voltage output signal (4 mV/mm/s) suitable for spectral analysis
- Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
- IP68 protection rating
Description
Voltage output signal: 4 mV/mm/s.
Frequency response: up to 7000 Hz.
Temperature range: −55 to 120°C.
The PV660 piezoelectric velocity sensor is a general-purpose industry standard IEPE (integrated electronics piezo electric) vibration sensor with a piezoelectric sensing element, integrated electronics and a voltage output. It is available with a sensitivity of 4 mV/mm/s.
The PV660 is available as a sensor only (with a top connector). This allows a range of cable assemblies to be used to connect the sensor to the monitoring system, depending on the application/environment.
The PV660 is designed and manufactured for use in harsh industrial environments.
Features
- Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
- Industry standard IEPE (integrated electronics piezo electric) vibration sensor
- Dynamic voltage output signal (4 mV/mm/s) suitable for spectral analysis
- Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
- IP68 protection rating
Additional information
Output type | Voltage (2-wire) |
---|---|
Sensitivity | 4 mV/mm/s |
Operating temperature range | −67 to 248 °F | −55 to 120 °C |
Frequency response | 1.9 to 7000 Hz |
Sensitivity tolerance | ±5% |
Dynamic measurement range | 1250 mm/s |
Linearity | ±1% |
Transverse sensitivity | <5% |
Resonant frequency | 16 kHz |
Type of electronics | Integrated |
The following downloads are available for this product: