VM600 Mk2 / VM600 ASPS auxiliary sensor power supply
- Sensor (sensors / measurement chains) power supply for VM600Mk2/VM600 systems
- AC-input version (115/230 VAC)
- Two independent 24 VDC 1.1 A outputs
- Short-circuit protection
- Internal redundancy (two AC-DC converters per output) for high availability
Description
Auxiliary sensor power supply for VM600Mk2/VM600 systems (ABE04x racks).
Features
- Sensor (sensors / measurement chains) power supply for VM600Mk2/VM600 systems
- AC-input version (115/230 VAC)
- Two independent 24 VDC 1.1 A outputs
- Short-circuit protection
- Internal redundancy (two AC-DC converters per output) for high availability
Additional information
| Monitoring system (application) | Machinery protection, condition monitoring, combustion monitoring |
|---|---|
| VM600 system function | Common |
| VM600 system component | Sensor power supply |
| VM600 component function | Power supply |
| VM600 component and rack compatibility | ABE040, ABE042 |
The following downloads are available for this product:
VM600 Mk2 / VM600 ASPS auxiliary sensor power supply data sheet
Related products
-
-
- VM600 Mk2 / VM600 ABE040 system rack
- VM600Mk2 and VM600 system racks to house machinery protection and/or condition monitoring systems
- Robust aluminium construction
- Space for up to two RPS6U rack power supplies (AC-input and/or DC-input) to support rack power supply redundancy
- Space for up to 12 processing cards and power supply check relay
- Available in standard, separate circuits (IEC 60255-5), cCSAus (IEC 61010-1) and conformally coated versions
-
-
- Out of Stock
- VM600 IOCR input/output card for CPUR card
These cards are discontinued with some spares available, please see below for an updated alternative.
– VM600: there is no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- Input/output (interface) card for CPUR card
-
-
- Out of Stock
- VM600 IRC4 intelligent relay card
This card is discontinued with spares no longer available.
– VM600: no replacement.
– VM600Mk2: no replacement.- Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
- 8 relays configurable as 8 SPDT or 4 DPDT
- Fully software configurable using the IRC4 Configurator software
- Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
- All relay contacts are available on the screw-terminal connectors
-
-
- Out of Stock
- VM600 CPUR rack controller and communications interface card
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
-