VM600 CPUM modular CPU card
These cards are discontinued with spares no longer available. Please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
This product is no longer available for purchase. Please use the enquiry button only if you require support, otherwise please select the product below.
Description
This product has been discontinued.
VM600 rack controller and communications interface card.
The VM600 CPUM and IOCN modular CPU card and input/output card is a rack controller and communications interface card pair that acts as a system controller and data communications gateway for a VM600 rack-based machinery protection system (MPS) and/or condition monitoring system (CMS) from Meggitt’s Vibro-Meter® product line.
Note: Different versions of CPUx/IOCx rack controller and communications interface card pair are available, as follows:
- The CPUM/IOCN is the original version with a front-panel display and support for Modbus RTU/TCP or PROFINET (PNR 200-595-VVV-VVV).
- The CPUR/IOCR is a version with rack controller redundancy and support for Modbus RTU/TCP (PNR 600-007-VVV-VVV).
- The CPUR2/IOCR2 is a version with mathematical processing of fieldbus data and support for Modbus TCP and PROFIBUS DP (PNR 600-026-000-VVV).
Features
- VM600 CPUM/IOCN rack controller and communications interface card pair with support for Modbus RTU/TCP or PROFINET, and a front-panel display
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet or RS-232 serial connection to a computer running the VM600 MPSx software
- Front-panel display for visualisation of monitored outputs and alarm limits from protection cards
- Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUM) security
- VM600 system event and measurement event logs available via the VM600 MPSx software
Additional information
| Monitoring system (application) | Machinery protection, condition monitoring, combustion monitoring |
|---|---|
| VM600 system function | Common |
| VM600 system component | Processing card |
| VM600 component function | Rack controller and communications interface |
| VM600 component and rack compatibility | ABE040, ABE042 |
| VM600 communications interfaces | Modbus RTU/TCP or PROFINET |
| VM600 rack alarm reset (AR) | Yes |
| VM600 MPS rack (CPUx) security | Yes |
| VM600 event logs | System event and measurement event logs (up to 10000) |
| VM600 output relays | 0 |
The following downloads are available for this product:
Related products
-
-
- VM600 XMC16 condition monitoring module for combustion
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- 16 dynamic channels and 4 tachometer channels
- Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMC16)
- Simultaneous data acquisition on all channels with asynchronous (fixed frequency) or synchronous (order tracked) sampling
- 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 500 ms
- Designed for operation with the VibroSight® software
-
-
-
- VM600Mk2 RPS6U rack power supplies
Rack power supplies for VM600Mk2
-
-
-
- Interface kit for machinery monitoring systems with buffered outputs
- Supports up to 25 channels, which can be used for dynamic channels or tachometer speed signals
- Interface kit consists of a module with a 25-pin D-sub connector input and screw terminal outputs, and a cable with 25-pin D-sub connectors
- DIN-rail mounting module with metal, movable mounting adaptor for flexible positioning
- Simplify the expansion of existing machinery monitoring systems that make their transducer input signals available as buffered outputs that can be shared with other systems
- Easy to implement and reliable signal interface for sharing signals with VM600 XMx16/XIO16T cards and VibroSmart® VSV300/VSB300 modules
-
-
-
- VM600 Mk2 / VM600 ASPS auxiliary sensor power supply
- Sensor (sensors / measurement chains) power supply for VM600Mk2/VM600 systems
- AC-input version (115/230 VAC)
- Two independent 24 VDC 1.1 A outputs
- Short-circuit protection
- Internal redundancy (two AC-DC converters per output) for high availability
-