VM600 CPUR rack controller and communications interface card
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.
- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
This product is no longer available for purchase. Please use the enquiry button only if you require support, otherwise please select the product below.
Rack controller and communications interface module CPUMMk2 + IOCNMk2
Description
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.
VM600 rack controller and communications interface card.
The VM600 CPUR and IOCR rack controller and communications interface card pair is a central processing unit (CPU) card pair that acts as a system controller and data communications gateway for a VM600 rack-based machinery protection system (MPS) and/or condition monitoring system (CMS) from Meggitt’s Vibro-Meter® product line.
Note: Different versions of CPUx/IOCx rack controller and communications interface card pair are available, as follows:
- The CPUM/IOCN is the original version with a front-panel display and support for Modbus RTU/TCP or PROFINET (PNR 200-595-VVV-VVV).
- The CPUR/IOCR is a version with rack controller redundancy and support for Modbus RTU/TCP (PNR 600-007-VVV-VVV).
- The CPUR2/IOCR2 is a version with mathematical processing of fieldbus data and support for Modbus TCP and PROFIBUS DP (PNR 600-026-000-VVV).
Features
- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
Additional information
| Monitoring system (application) | Machinery protection, condition monitoring, combustion monitoring |
|---|---|
| VM600 system function | Common |
| VM600 system component | Processing card |
| VM600 component function | Rack controller and communications interface |
| VM600 component and rack compatibility | ABE040, ABE042 |
| VM600 communications interfaces | Modbus RTU/TCP |
| VM600 rack alarm reset (AR) | No |
| VM600 MPS rack (CPUx) security | No |
| VM600 event logs | System event and measurement event logs (up to 1000) |
| VM600 output relays | 5 |
The following downloads are available for this product:
Related products
-
- Out of Stock
- VM600 AMC8 analog monitoring card
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replacement module available 2024-2025.- 8 temperature or process monitoring channels
- 1 processed output per channel and 1 processed output per multi-channel (4 per AMC8)
- Highly configurable card supports temperature monitoring using thermocouples and/or RTDs, and process monitoring using current and/or voltage inputs
- Highly integrated card pair (with IOC8T) includes DC outputs, relays and serial communications interfaces
- Designed for operation with the VM600 MPSx software
-
-
-
- VM600 XMC16 condition monitoring module for combustion
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- 16 dynamic channels and 4 tachometer channels
- Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMC16)
- Simultaneous data acquisition on all channels with asynchronous (fixed frequency) or synchronous (order tracked) sampling
- 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 500 ms
- Designed for operation with the VibroSight® software
-
-
- Out of Stock
- VM600 IOC4T input/output card for MPC4 cards
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.- Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
- Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
- Differential buffered (raw) transducer output per dynamic channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
- 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
-
-
-
- VM600 Mk2 / VM600 ASPS auxiliary sensor power supply
- Sensor (sensors / measurement chains) power supply for VM600Mk2/VM600 systems
- AC-input version (115/230 VAC)
- Two independent 24 VDC 1.1 A outputs
- Short-circuit protection
- Internal redundancy (two AC-DC converters per output) for high availability
-