VM600 CPUR2 rack controller and communications interface card

VM600 CPUR2 rack controller and communications interface card

  • VM600 CPUR2/IOCR2 rack controller and communications interface card pair with support for Modbus TCP and PROFIBUS DP
  • “One-Shot” configuration management of protection cards (MPC4) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
  • Mathematical processing of data to be shared via fieldbus and card pair status (health) information via fieldbus
  • Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUR2) security with a removable key
  • Two output relays to signal system statuses and alarms
Categories: ,
Compare

Description

VM600 rack controller and communications interface card.

The VM600 CPUR2 and IOCR2 rack controller and communications interface card pair is a central processing unit (CPU) card pair that acts as a system controller and data communications gateway for a VM600 rack-based machinery protection system (MPS) and/or condition monitoring system (CMS) from Meggitt’s Vibro-Meter® product line.

Note: Different versions of CPUx/IOCx rack controller and communications interface card pair are available, as follows:

  • The CPUM/IOCN is the original version with a front-panel display and support for Modbus RTU/TCP or PROFINET (PNR 200-595-VVV-VVV).
  • The CPUR/IOCR is a version with rack controller redundancy and support for Modbus RTU/TCP (PNR 600-007-VVV-VVV).
  • The CPUR2/IOCR2 is a version with mathematical processing of fieldbus data and support for Modbus TCP and PROFIBUS DP (PNR 600-026-000-VVV).

Features

  • VM600 CPUR2/IOCR2 rack controller and communications interface card pair with support for Modbus TCP and PROFIBUS DP
  • “One-Shot” configuration management of protection cards (MPC4) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
  • Mathematical processing of data to be shared via fieldbus and card pair status (health) information via fieldbus
  • Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUR2) security with a removable key
  • Two output relays to signal system statuses and alarms

Additional information

Monitoring system (application)

Machinery protection, condition monitoring, combustion monitoring
VM600 system function

Common
VM600 system component

Processing card
VM600 component function

Rack controller and communications interface
VM600 component and rack compatibility

ABE040, ABE042
VM600 communications interfaces

Modbus TCP and PROFIBUS DP
VM600 rack alarm reset (AR)

Yes
VM600 MPS rack (CPUx) security

Yes – with removable key
VM600 event logs

No
VM600 output relays

2

The following downloads are available for this product:

Related products

  • VM600 IOC4T input/output card for MPC4 cards
    • Out of Stock
      VM600 IOC4T input/output card for MPC4 cards
    • VM600 IOC4T input/output card for MPC4 cards

    • These cards are being phased out with spares available until 2027.
      – VM600: no replacement.
      – VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.

      • Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
      • Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
      • Differential buffered (raw) transducer output per dynamic channel
      • DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
      • 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
    Compare
  • VM600 Mk2 / VM600 ABE040 system rack
    • VM600 Mk2 / VM600 ABE040 system rack
    • VM600 Mk2 / VM600 ABE040 system rack
      • VM600Mk2 and VM600 system racks to house machinery protection and/or condition monitoring systems
      • Robust aluminium construction
      • Space for up to two RPS6U rack power supplies (AC-input and/or DC-input) to support rack power supply redundancy
      • Space for up to 12 processing cards and power supply check relay
      • Available in standard, separate circuits (IEC 60255-5), cCSAus (IEC 61010-1) and conformally coated versions
    Compare
  • VM600 XMC16 condition monitoring module for combustion
    • VM600 XMC16 condition monitoring module for combustion
    • VM600 XMC16 condition monitoring module for combustion

    • These cards are still available with phase out planned for 2025.
      – VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.

      Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.

      • 16 dynamic channels and 4 tachometer channels
      • Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMC16)
      • Simultaneous data acquisition on all channels with asynchronous (fixed frequency) or synchronous (order tracked) sampling
      • 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 500 ms
      • Designed for operation with the VibroSight® software
    Compare
  • VM600 Mk2 / VM600 ABE042 system rack
    • VM600 Mk2 / VM600 ABE042 system rack
    • VM600 Mk2 / VM600 ABE042 system rack
      • VM600Mk2 and VM600 system racks to house machinery protection and/or condition monitoring systems
      • Robust aluminium construction
      • Space for up to two RPS6U rack power supplies (AC-input and/or DC-input) to support rack power supply redundancy
      • Space for up to 12 processing cards and power supply check relay
      • Available in a version with mounting brackets positioned at the rear of the rack, and in a conformally coated version
    Compare