VM600 IOC4T input/output card for MPC4 cards
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.
- Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
- Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
- Differential buffered (raw) transducer output per dynamic channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
- 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
This product is no longer available for purchase. Please use the enquiry button only if you require support, otherwise please select the product below.
Description
These cards are being phased out with spares available until 2027.
High-quality, high-reliability interface (input/output) card for the MPC4 and MPC4SIL machinery protection cards used by VM600 rack-based machinery monitoring systems. The IOC4T card supports 4 dynamic channels and 2 tachometer (speed) channels, all of which are independently configurable. An IOC4T interface card is installed in the rear of a VM600 ABE04x rack, directly behind an MPC4 card or MPC4SIL card, to form a card pair.
Features
- Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
- Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
- Differential buffered (raw) transducer output per dynamic channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
- 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
Additional information
| Monitoring system (application) | Machinery protection |
|---|---|
| VM600 system function | Machinery protection |
| VM600 system component | Interface (input/output) card |
| VM600 component function | Machinery protection |
| VM600 component and rack compatibility | ABE040, ABE042, ABE056 |
| VM600 card measurement channels | 4 dynamic channels and 2 tachometer (speed) channels |
The following downloads are available for this product:
Related products
-
-
- VM600 Mk2 / VM600 ASPS auxiliary sensor power supply
- Sensor (sensors / measurement chains) power supply for VM600Mk2/VM600 systems
- AC-input version (115/230 VAC)
- Two independent 24 VDC 1.1 A outputs
- Short-circuit protection
- Internal redundancy (two AC-DC converters per output) for high availability
-
-
- Out of Stock
- VM600 MPC4 machinery protection card
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.- 4 dynamic channels and 2 tachometer channels
- 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4), 1 processed output per tacho channel
- Highly configurable card supports all measurements required by machinery protection applications, such as relative and/or absolute vibration
- Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
- Designed for operation with the VM600 MPSx software
-
-
- Out of Stock
- VM600 IRC4 intelligent relay card
This card is discontinued with spares no longer available.
– VM600: no replacement.
– VM600Mk2: no replacement.- Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
- 8 relays configurable as 8 SPDT or 4 DPDT
- Fully software configurable using the IRC4 Configurator software
- Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
- All relay contacts are available on the screw-terminal connectors
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-