VM600 IRC4 intelligent relay card
This card is discontinued with spares no longer available.
– VM600: no replacement.
– VM600Mk2: no replacement.
- Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
- 8 relays configurable as 8 SPDT or 4 DPDT
- Fully software configurable using the IRC4 Configurator software
- Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
- All relay contacts are available on the screw-terminal connectors
This product is no longer available for purchase.
Description
This card is discontinued with spares no longer available.
High-quality, high-reliability intelligent relay card for VM600 rack-based machinery monitoring systems. An IRC4 intelligent relay card is installed in the rear of a VM600 ABE04x rack.
Features
- Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
- 8 relays configurable as 8 SPDT or 4 DPDT
- Fully software configurable using the IRC4 Configurator software
- Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
- All relay contacts are available on the screw-terminal connectors
Additional information
| Monitoring system (application) | Machinery protection |
|---|---|
| VM600 system function | Machinery protection |
| VM600 system component | Relay card |
| VM600 component function | Intelligent relay |
| VM600 component and rack compatibility | ABE040, ABE042 |
Sorry, there are no downloads currently available for this product
Related products
-
-
- VM600 XIO16T input/output module for XMx16 modules
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
- Differential signal input per dynamic channel and tachometer channel
- Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
-
-
- Out of Stock
- VM600 CPUM modular CPU card
These cards are discontinued with spares no longer available. Please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
-
-
- Out of Stock
- VM600 MPC4 machinery protection card
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.- 4 dynamic channels and 2 tachometer channels
- 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4), 1 processed output per tacho channel
- Highly configurable card supports all measurements required by machinery protection applications, such as relative and/or absolute vibration
- Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
- Designed for operation with the VM600 MPSx software
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-