VM600 XIO16T input/output module for XMx16 modules
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.
Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
- Differential signal input per dynamic channel and tachometer channel
- Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
Please check out the Recommended Products shown below.
Description
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.
Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
High-quality, high-reliability input/output module for the XMV16 and XMC16 condition monitoring modules used by VM600Mk2/VM600 rack-based machinery monitoring systems. The XIO16T module supports 16 dynamic channels and 4 tachometer (speed) channels, all of which are independently configurable. The XIO16T input/output (interface) module is installed in the rear of a VM600Mk2/VM600 ABE04x system rack, directly behind the associated XMV16 or XMC16 module, to form a set of modules (card pair).
Features
- Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
- Differential signal input per dynamic channel and tachometer channel
- Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
Additional information
| Monitoring system (application) | Condition monitoring, combustion monitoring |
|---|---|
| VM600 system function | Condition monitoring |
| VM600 system component | Interface (input/output) card |
| VM600 component function | Condition monitoring for vibration, condition monitoring for combustion |
| VM600 component and rack compatibility | ABE040, ABE042, ABE056 |
| VM600 card measurement channels | 16 dynamic channels and 4 tachometer (speed) channels |
The following downloads are available for this product:
Related products
-
-
- VM600 IOCR2 input/output card for CPUR2 card
- Input/output (interface) card for CPUR card
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-
-
- Out of Stock
- VM600 RLC16 relay card
This card is being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by RLC16Mk2.- Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
- 16 SPDT relays
- Hardware configurable
- Relays configurable as normally energised (NE) or normally de-energised (NDE)
- All relay contacts are available on the screw-terminal connectors
-
-
- Out of Stock
- VM600 CPUM modular CPU card
These cards are discontinued with spares no longer available. Please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
-