VM600 XMV16 condition monitoring module for vibration
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.
Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- 16 dynamic channels and 4 tachometer channels
- Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMV16)
- Simultaneous data acquisition on all channels with asynchronous (fixed frequency) or synchronous (order tracked) sampling
- 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 500 ms
- Designed for operation with the VibroSight® software
Please check out the Alternate Product shown below.
VM600 Mk2 / VM600 XMV16 + XIO16T vibration monitoring module
Description
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.
Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
High-quality, high-reliability condition monitoring module for VM600Mk2/VM600 rack-based machinery monitoring systems – optimised for high-performance vibration monitoring applications. The XMV16 condition monitoring module for vibration provides 16 dynamic channels and 4 tachometer (speed) channels, all of which are independently configurable. The XMV16 processing module is is always used with an associated XIO16T input/output module as a set of modules (card pair).
Features
- 16 dynamic channels and 4 tachometer channels
- Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMV16)
- Simultaneous data acquisition on all channels with asynchronous (fixed frequency) or synchronous (order tracked) sampling
- 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 500 ms
- Designed for operation with the VibroSight® software
Additional information
| Monitoring system (application) | Condition monitoring |
|---|---|
| VM600 system function | Condition monitoring |
| VM600 system component | Processing card |
| VM600 component function | Condition monitoring for vibration |
| VM600 component and rack compatibility | ABE040, ABE042, ABE056 |
| VM600 card measurement channels | 16 dynamic channels and 4 tachometer (speed) channels |
The following downloads are available for this product:
Related products
-
-
- VM600 CPUR2 rack controller and communications interface card
- VM600 CPUR2/IOCR2 rack controller and communications interface card pair with support for Modbus TCP and PROFIBUS DP
- “One-Shot” configuration management of protection cards (MPC4) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Mathematical processing of data to be shared via fieldbus and card pair status (health) information via fieldbus
- Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUR2) security with a removable key
- Two output relays to signal system statuses and alarms
-
-
-
- Voltage-drop adaptor for VM600 IOC4T card
- 4 individually configurable channels for use with IOC4T dynamic channel and tachometer channel inputs
- Reduces a channel’s sensor power supply output voltage
- −27 V input to −24 V output, −27 V input to −18 V output or straight-through connection per channel
- Reduces external circuitry and wiring when IOC4T sensor power supply outputs are connected to third-party front ends
-
-
- Out of Stock
- VM600 CPUM modular CPU card
These cards are discontinued with spares no longer available. Please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
-
-
- Out of Stock
- VM600 CPUR rack controller and communications interface card
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
-