Relay module RLC16MK2

Relay module RLC16Mk2

Designed for operation with the second generation of VM600Mk2 rack-based machinery protection system.

The RLC16Mk2 is a second generation module that provides 16 additional relays per module in VM600Mk2 systems.

Categories: ,
Compare

Description

The RLC16Mk2 relay module is an optional module used to provide additional relays when the four user-configurable relays per MPC4Mk2 + IOC4Mk2 module are not sufficient for an application.

The machinery protection relay RLC16Mk2 provides 16 user-configurable relays and diagnostics (BIST) with system-wide safety line to drive all system relays and analog outputs to a safe state.

Available modules

  • RLC16Mk2
  • RLC16Mk2 SIL

The following downloads are available for this product:

Related products

  • VM600 MPC4SIL machinery protection card
    • VM600 MPC4SIL machinery protection card
    • VM600 MPC4SIL machinery protection card
      • 4 dynamic channels
      • 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4)
      • Highly configurable card supports a subset of SIL 1 approved measurements for machinery protection, including relative and/or absolute vibration
      • Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
      • Designed for operation with the VM600 MPSx software
    Compare
  • VM600 CPUR rack controller and communications interface card
    • Out of Stock
      VM600 CPUR rack controller and communications interface card
    • VM600 CPUR rack controller and communications interface card

    • These cards are discontinued with some spares available.
      – VM600: no replacement.
      – VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.

      • VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
      • “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
      • Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
      • Five output relays to signal system statuses and alarms
      • VM600 system event and measurement event logs available via VibroSight® software
    Compare
  • VM600 IOCR input/output card for CPUR card
    • Out of Stock
      VM600 IOCR input/output card for CPUR card
    • VM600 IOCR input/output card for CPUR card

    • These cards are discontinued with some spares available, please see below for an updated alternative.
      – VM600: there is no replacement.
      – VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.

      • Input/output (interface) card for CPUR card
    Compare
  • VM600 XIO16T input/output module for XMx16 modules
    • VM600 XIO16T input/output module for XMx16 modules
    • VM600 XIO16T input/output module for XMx16 modules

    • These cards are still available with phase out planned for 2025.
      – VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.

      Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.

      • Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
      • Differential signal input per dynamic channel and tachometer channel
      • Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
    Compare