APF195 24 VDC 0.26 A power supply
- DC input and two 24 VDC outputs
- DIN-rail mounting
- The two 24 VDC outputs of an APF195 can be connected in parallel in order to provide an output current up to 0.26 A
Description
24 VDC 0.26 A power supply, for use with Vibro-Meter’s VM600 rack-based and VibroSmart distributed monitoring systems
Features
- DC input and two 24 VDC outputs
- DIN-rail mounting
- The two 24 VDC outputs of an APF195 can be connected in parallel in order to provide an output current up to 0.26 A
Additional information
| Input voltage | 9.4 to 36 VDC |
|---|---|
| Output voltage | 24 VDC |
| Output current | 0.26 A |
| Output ripple | <50 mVPEAK-TO-PEAK |
| Load regulation | ±3% |
| Efficiency | >80% |
| Output protection | Output short-circuit protection, output over-voltage protection |
| Operating temperature range | −40 to 185 °F | −40 to 85 °C |
The following downloads are available for this product:
Related products
-
-
- CE281 piezoelectric accelerometer
- Designed for the long-term measurement of vibration in severe environments, such as gearboxes, compressors, pumps and fans
- Wide temperature range: −55 to 260 °C
- High frequency response: up to 7000 Hz
- Current output (10 µA/g) for signal transmission over long distances: up to 1000 m
- Certified for use in potentially explosive atmospheres
-
-
-
- VE210 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines(lower-speed machines).
- Very low frequency response: down to 0.5 Hz
- Temperature range: −25 to 80 °C
- Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
- Any mounting orientation
-
-
-
- TQ403 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 12 mm measurement range (Ø18 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-
-
-
- LS121 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 20 to 60 mm linear measurement range (15 to 65 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
-