Skip to content
VibroSmart® VSV301 monitoring module
2 dynamic channels and 1 auxiliary channel (tachometer or DC input)
Up to 20 processed outputs per module (for the 2 dynamic channels, 1 auxiliary channel and 1 dual-shaft relative channel)
Highly configurable module supports simultaneous data acquisition on all channels, with asynchronous/synchronous sampling depending on the processing
24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 1600 lines every 100 ms
Highly integrated module (with VSB300 terminal base) includes sensor power supplies, buffered outputs, DC outputs, relays and Ethernet communications interfaces
Compare
VibroSmart® VSI010 communications interface module
Up to 2 serial fieldbus interfaces (Modbus RTU or PROFIBUS DP) or 1 Ethernet fieldbus interface (Modbus TCP)
PROFIsafe safety layer to ensure more reliable PROFIBUS communications
Acts as a data communications bridge between VSV30x modules and third-party systems such as a DCS or PLC over industry standard fieldbuses
8 basic and 4 advanced logic functions to combine alarm and status information from VibroSmart modules in the same measurement block
Two VSI010 modules can be used in the same measurement block to support redundant operations
Compare
VibroSmart® VSB300 terminal base for VSV30x module
Input/output (interface) terminal base for a VSV30x module – supports 2 dynamic channels and 1 auxiliary channel (tachometer or DC input)
Differential signal input with sensor power supply output per dynamic channel and per auxiliary channel
Differential buffered (raw) transducer output per channel
DC outputs configurable as current-based signal (4 to 20 mA) per dynamic channel
2 configurable SPDT relays, and alarm reset (AR), alarm bypass (AB), trip multiply (TM) and module lock (Lock) control inputs
Compare
VibroSmart® VSB010 terminal base for VSI010 module
Input/output (interface) terminal base for a VSI010 module – supports 2 fieldbus interfaces
Up to 2 serial fieldbus interfaces (Modbus RTU or PROFIBUS DP) with VSF001 serial fieldbus communications adaptor
PROFIsafe safety layer to ensure more reliable PROFIBUS communications
1 Ethernet fieldbus interface (Modbus TCP) with VSF002 Ethernet fieldbus communications adaptor
2 configurable SPDT relays, and alarm reset (AR), alarm bypass (AB), trip multiply (TM) and module lock (Lock) control inputs
Compare
VibroSmart® VSA301 buffered output amplifier
Designed for operation with the VSV300 monitoring module
Two dynamic channels with current or voltage inputs, AC or DC coupling, fixed-gain amplification of 10, and voltage and current outputs
One tachometer channel with current or voltage input, offset removal, 3.3 to 5.0 V digital level translation and a voltage output
Voltage signal transmission over short distances, up to 5 m
Current signal transmission over long distances, up to 500 m
Compare
VibroSmart® VSN010 real-time Ethernet switch
Real-time Ethernet switch providing fault-tolerant protocol redundancy for networks
Redundant real-time communications based on high-availability seamless redundancy (HSR, IEC 62439-3) with zero recovery time
Redundant non-real-time communications based on the rapid spanning tree protocol (RSTP, IEEE 802.1D)
Enables cost-effective redundant networks of VibroSmart modules, with zero time to recovery for a single point of failure
Allows VibroSmart modules to be arranged in a HSR ring network topology for increased system availability
Compare
VibroSmart® VSF001 serial fieldbus communications adaptor
Designed for operation with the VSI010 communications interface module
Serial fieldbus communications adaptor with two 9-pin D-sub connectors
Supports serial-based fieldbuses (communications protocols) such as Modbus RTU and PROFIBUS DP
Plugs into the J5 and J6 screw-terminal connectors on the VSB010 terminal base used by the VSI010 module
Compare
VibroSmart® VSF002 Ethernet fieldbus communications adaptor
Designed for operation with the VSI010 communications interface module
Ethernet fieldbus communications adaptor with two 8P8C (RJ45) connectors
Supports Ethernet-based fieldbuses (communications protocols) such as Modbus TCP
Plugs into the J4 screw-terminal connector on the VSB010 terminal base used by the VSI010 module
Compare
VibroSmart® VSA004 BNC patch panel
Designed for operation with with VSV30x + VSB300 monitoring modules
Patch panel for use with VSA003 cable assemblies
DIN-rail mounting BNC patch panel with 10 slots
Each patch panel slot supports supports three channels/signals (one VSV30x + VSB300 module)
Compare
VibroSmart® VSA003 BNC cable assembly
Designed for operation with VSV30x + VSB300 monitoring modules
Cable assembly for use with VSA004 BNC patch panels
Connects the buffered sensor outputs available from the J2 connector of a VSV30x + VSB300 module / terminal base to other systems
Each cable assembly supports three channels/signals (one VSV30x + VSB300 module)
Compare
