EC319 cable assembly
- High-quality, reliable cable assembly for CE110I, CE680M511, CE680M611 and PV102 vibration measurement systems
- K219 cable with RADOX® insulation (Ø 4.8 mm)
- 2-wire, with shield
- Threaded connector (MS3456L type) to flying leads
Description
High-quality, high-reliability cable assembly for use with CE110I, CE680M511, CE680M611 and PV102 vibration sensors (piezoelectric accelerometers).
Note: While the EC319 cable assembly and the EC318 cable assembly are similar, the EC319 has a flexible leaktight protection hose and the EC318 has a flexible protection hose.
Features
- High-quality, reliable cable assembly for CE110I, CE680M511, CE680M611 and PV102 vibration measurement systems
- K219 cable with RADOX® insulation (Ø 4.8 mm)
- 2-wire, with shield
- Threaded connector (MS3456L type) to flying leads
Additional information
| Measurement system | CE110I, CE680M511, CE680M611 and PV102 vibration |
|---|---|
| Sensor | CE110I, CE680M511, CE680M611, PV102 |
| Length | From 19.7 in (in steps of 19.7 in) | From 500 mm (in steps of 500 mm) |
| Protection | Optional flexible leak-tight hose |
The following downloads are available for this product:
Related products
-
-
- CP235 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- Very high sensitivity: 750 pC/bar
- High operating temperature: up to 520 °C
- Available in different integral mineral-insulated (MI) cable lengths, terminated with a high-temperature connector
- Certified for use in potentially explosive atmospheres
-
-
-
- CA134 piezoelectric accelerometer
Designed for the long-term measurement of vibration over wide temperature ranges in extreme environments, such as gas turbines or cryogenic applications
- Operating temperature: −54 to 500 °C, −253 (20 K) to 500 °C for cryogenic version
- Frequency response: 0.5 to 6000 Hz
- Available as a sensor only (no integral cable) or with an integral mineral-insulated (MI) with a double braid
- Certified for use in potentially explosive atmospheres
-
-
-
- CV213 velocity transducer
- Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Wide temperature range: −29 to 204 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
-
-
- AE119 housing expansion probe
- Designed for the long-term measurement of housing expansion in extreme environments, such as gas turbines and steam turbines
- 50 or 100 mm measurement range
- 0 to 80 °C (32 to 176 °F) operating temperature, IP54 protection rating
- Integrated electronics
- Current loop output (4 to 20 mA) for signal transmission over long distances
-