LS121 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 20 to 60 mm linear measurement range (15 to 65 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
Description
20 to 60 mm range, −15 to 125 °C, 1.5 tesla.
The LS121 air-gap sensor is a high-quality, high-reliability air-gap sensor for use with an ILS731 signal conditioner, which provides voltage outputs and a current output.
The LS121 is designed and built for long-term use in extreme environments characterised by high temperatures and/or high-strength magnetic fields.
Features
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 20 to 60 mm linear measurement range (15 to 65 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
Additional information
| Linear measurement range | 0.79 to 2.4 in | 20 to 60 mm |
|---|---|
| Operating temperature range | 5 to 257 °F | −15 to 125 °C |
| Magnetic field | Up to 1.5 Tesla |
| Sensor dimensions | 14 x 2.4 x 0.19 in | 345 x 60 x 4.8 mm |
| Integrated cable length | 16.4 or 32.8 ft | 5.0 or 10.0 m |
The following downloads are available for this product:
Related products
-
-
- LS120 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 5 to 30 mm linear measurement range (1.875 to 33.125 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
-
Related products
-
-
- TQ403 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 12 mm measurement range (Ø18 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-
-
-
- CE620 piezoelectric accelerometer
- Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
- Industry standard IEPE (integrated electronics piezo electric) vibration sensor
- Dynamic voltage output signal (100 or 500 mV/g) suitable for spectral analysis
- Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
- IP68 protection rating
-
-
-
- VE210 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Very low frequency response: down to 0.5 Hz
- Temperature range: −25 to 80 °C
- Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
- Any mounting orientation
-
-
-
- PA150 probe mounting adaptor with proximity measurement chain
- Removable probe housing and probe adaptor rod containing a complete proximity measurement chain (TQ912 and IQS900)
- 2 or 4 mm measurement range (Ø8.2 mm sensor)
- Sealed die-cast aluminium housing and stainless steel adaptor rod, with choice of mounting orientation
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- Certified for use in potentially explosive atmospheres
-