PA150 probe mounting adaptor with proximity measurement chain
- Removable probe housing and probe adaptor rod containing a complete proximity measurement chain (TQ912 and IQS900)
- 2 or 4 mm measurement range (Ø8.2 mm sensor)
- Sealed die-cast aluminium housing and stainless steel adaptor rod, with choice of mounting orientation
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
Description
Complete probe mounting adaptor with proximity measurement chain (TQ912 and IQS900).
High-quality, high-reliability removable probe housing and probe adaptor rod containing a complete proximity measurement chain that consists of a TQ912 proximity sensor and a IQS900 signal conditioner, which provides either a voltage output or a current output (2 mm range: 8 mV/µm or 2.5 µA/µm, 4 mm range: 4 mV/µm or 1.25 µA/µm).
The PA150 is designed and built for long-term use in harsh environments characterised by industrial temperatures and/or hazardous areas (potentially explosive atmospheres).
Features
- Removable probe housing and probe adaptor rod containing a complete proximity measurement chain (TQ912 and IQS900)
- 2 or 4 mm measurement range (Ø8.2 mm sensor)
- Sealed die-cast aluminium housing and stainless steel adaptor rod, with choice of mounting orientation
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
Additional information
| Output type | Current (2-wire) or voltage (3-wire) |
|---|---|
| Type of probe mounting adaptor | Removable probe housing and probe adaptor rod |
| Mounting position adjustment | ±0.39 in | ±10 mm |
| Probe housing material | Aluminium alloy |
| Probe housing gasket material | Nitrile rubber (NBR) |
| Probe adaptor rod material | Stainless steel 1.4301 |
| Probe adaptor assembly material | Stainless steel 1.4305 |
| Mounting orientation for probe housing | Longitudinal or perpendicular |
| Configurable adaptor length for probe | Yes |
| Temperature range | −31 to 185 °F | −35 to 85 °C |
| Protection rating | IP65 |
| Hazardous area certifications | Ex e |
The following downloads are available for this product:
Related products
-
-
- CE311 piezoelectric accelerometer
- Designed for the long-term measurement of vibration in severe environments, such as heavy-duty gas turbines and steam turbines
- High frequency response: up to 8000 Hz
- High sensitivity: 50 µA/g
- Current output (50 µA/g) for signal transmission over long distances: up to 1000 m
- Certified for use in potentially explosive atmospheres
-
-
-
- LS121 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 20 to 60 mm linear measurement range (15 to 65 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
-
-
-
- PA151 probe mounting adaptor
- Removable probe housing and probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Sealed die-cast polyester housing and stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 100 °C temperature, IP65 protection rating
- Certified for use in potentially explosive atmospheres
-
-
-
- CP235 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- Very high sensitivity: 750 pC/bar
- High operating temperature: up to 520 °C
- Available in different integral mineral-insulated (MI) cable lengths, terminated with a high-temperature connector
- Certified for use in potentially explosive atmospheres
-