DIC413 signal conditioner and de-icing controller
- Signal conditioning and de-icing control for the EW140 ice-detection sensor
- Voltage output: ice thickness
- Relay outputs: OK and ice alarm
- Voltage output for signal transmission over medium distances and relay outputs for indication and control
- Certified for use in potentially explosive atmospheres
Description
Signal conditioner and de-icing controller for use with ice-detection sensors (EW).
The DIC413 signal conditioner and de-icing controller is a high-quality, high-reliability conditioner for use with the EW140 ice-detection sensors.
The DIC413 is configurable (ice thickness, relay configuration/operation), and provides one voltage output and two relay outputs. It is designed and built for long-term use in environments characterised by hazardous areas (potentially explosive atmospheres).
Features
- Signal conditioning and de-icing control for the EW140 ice-detection sensor
- Voltage output: ice thickness
- Relay outputs: OK and ice alarm
- Voltage output for signal transmission over medium distances and relay outputs for indication and control
- Certified for use in potentially explosive atmospheres
Additional information
| Output type | Voltage (one) and relays (two) |
|---|---|
| Measurement system | EW ice detection |
| Sensor | EW140 ice-detection sensor |
| Linearity | ≤ ± 2.5, 5 or 12 % of full scale |
| Operating temperature range | 32 to 140 °F | 0 to 60 °C |
| Protection rating | IP65 |
| Hazardous area certifications | [Ex ia], [Ex ib] |
The following downloads are available for this product:
- EW140 and DIC413 ice detection system for gas turbines data sheet
- LCIE 02 ATEX 6091 X Ex certificate (Europe) – DIC413
- CSA 2424154 Ex certificate (North America) – EW140, DIC413
- 241-413-000V024 product drawing [ LOGIN required ]
- EW140 and DIC413 ice-detection system installation manual [ LOGIN required ]
Related products
-
-
- PA150 probe mounting adaptor with proximity measurement chain
- Removable probe housing and probe adaptor rod containing a complete proximity measurement chain (TQ912 and IQS900)
- 2 or 4 mm measurement range (Ø8.2 mm sensor)
- Sealed die-cast aluminium housing and stainless steel adaptor rod, with choice of mounting orientation
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- Certified for use in potentially explosive atmospheres
-
-
-
- CV214 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −29 to 121 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-
-
-
- CE134 piezoelectric accelerometer
- Designed for the long-term measurement of vibration in severe environments, such as gas turbines and compressors
- Wide temperature range: −55 to 350 °C
- High frequency response: up to 10000 Hz
- Current output (5 µA/g) for signal transmission over long distances: up to 1000 m
- Certified for use in potentially explosive atmospheres
-
-
-
- TQ403 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 12 mm measurement range (Ø18 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 1.0, 5.0 or 10.0 m integral coaxial cable
- Certified for use in potentially explosive atmospheres
-