CE630 piezoelectric accelerometer
- Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
- Industry standard IEPE (integrated electronics piezo electric) vibration sensor
- Dynamic voltage output signal (100 or 500 mV/g) suitable for spectral analysis
- Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
- IP68 protection rating, side connector
Description
Voltage output signal: 100 or 500 mV/g.
Frequency response: up to 8000 Hz (100 mV/g versions), up to 3700 Hz (500 mV/g versions).
Temperature range: −55 to 120°C (100 mV/g versions), −55 to 90°C (500 mV/g versions).
The CE630 piezoelectric accelerometer is a general-purpose industry standard IEPE (integrated electronics piezo electric) vibration sensor with a piezoelectric sensing element, integrated electronics and a voltage output. It is available with a sensitivity of either 100 or 500 mV/g, and in standard versions or Ex versions.
The CE630 is available as a sensor only with a side connector. This allows a range of cable assemblies to be used to connect the sensor to the monitoring system, depending on the application and environment.
The CE630 is designed and manufactured for use in harsh industrial environments, including hazardous areas (potentially explosive atmospheres).
Features
- Designed for general-purpose vibration measurement, typically balance of plant (BOP) machinery such as compressors, gearboxes, motors, pumps and fans
- Industry standard IEPE (integrated electronics piezo electric) vibration sensor
- Dynamic voltage output signal (100 or 500 mV/g) suitable for spectral analysis
- Typically connected to a machinery monitoring system for protection and/or condition monitoring applications
- IP68 protection rating, side connector
Additional information
| Output type | Voltage (2-wire) |
|---|---|
| Sensitivity | 100 or 500 mV/g |
| Operating temperature range | −55 to 120°C (−67 to 248°F) or −55 to 90°C (−67 to 194°F) |
| Frequency response | 1 to 8000 or 0.2 to 3700 Hz |
| Sensitivity tolerance | ±5% |
| Dynamic measurement range | ±80 or ±16 g |
| Linearity | ±1% |
| Transverse sensitivity | <5% |
| Resonant frequency | 25 or 16 kHz |
| Type of electronics | Integrated |
| Hazardous area certifications | Ex ia |
The following downloads are available for this product:
Related products
-
-
- PA153 probe mounting adaptor
- Probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 200 °C temperature, IP65 protection rating
-
-
-
- LS121 air-gap sensor
- Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
- 20 to 60 mm linear measurement range (15 to 65 mm)
- −15 to 125 °C operating temperature
- Withstands magnetic fields up to 1.5 tesla
- Integral cable length of 5 or 10 m
-
-
-
- PA152 probe mounting adaptor
- Probe housing and probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Sealed die-cast aluminium housing and stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 200 °C temperature, IP65 protection rating
-
-
-
- CE281 piezoelectric accelerometer
- Designed for the long-term measurement of vibration in severe environments, such as gearboxes, compressors, pumps and fans
- Wide temperature range: −55 to 260 °C
- High frequency response: up to 7000 Hz
- Current output (10 µA/g) for signal transmission over long distances: up to 1000 m
- Certified for use in potentially explosive atmospheres
-