VM600 IOC8T input/output card for AMC8 card
These cards are being phased out with spares available until 2027.
VM600: no replacement.
VM600Mk2: replacement module available 2024-2025.
- Input/output (interface) card for an AMC8 card – supports 8 temperature or process monitoring channels
- Configurable signal input with current source output per monitoring channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per monitoring channel
- 4 configurable relays with three contacts available per relay, and alarm reset (AR) and danger bypass (DB) control inputs
This product is no longer available for purchase.
Description
These cards are being phased out with spares available until 2027.
VM600: no replacement.
VM600Mk2: replacement module available 2024-2025.
High-quality, high-reliability interface (input/output) card for the AMC8 analog monitoring card used by VM600 rack-based machinery monitoring systems. The IOC8T card supports 8 temperature or process monitoring channels, all of which are independently configurable. An IOC8T interface card is installed in the rear of a VM600 ABE04x rack, directly behind an AMC8 card, to form a card pair.
Features
- Input/output (interface) card for an AMC8 card – supports 8 temperature or process monitoring channels
- Configurable signal input with current source output per monitoring channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per monitoring channel
- 4 configurable relays with three contacts available per relay, and alarm reset (AR) and danger bypass (DB) control inputs
Additional information
| Monitoring system (application) | Machinery protection |
|---|---|
| VM600 system function | Machinery protection |
| VM600 system component | Interface (input/output) card |
| VM600 component function | Analog monitoring |
| VM600 component and rack compatibility | ABE040, ABE042, ABE056 |
| VM600 card measurement channels | 8 temperature or process monitoring channels |
The following downloads are available for this product:
Related products
-
-
- Interface kit for machinery monitoring systems with buffered outputs
- Supports up to 25 channels, which can be used for dynamic channels or tachometer speed signals
- Interface kit consists of a module with a 25-pin D-sub connector input and screw terminal outputs, and a cable with 25-pin D-sub connectors
- DIN-rail mounting module with metal, movable mounting adaptor for flexible positioning
- Simplify the expansion of existing machinery monitoring systems that make their transducer input signals available as buffered outputs that can be shared with other systems
- Easy to implement and reliable signal interface for sharing signals with VM600 XMx16/XIO16T cards and VibroSmart® VSV300/VSB300 modules
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-
-
-
- VM600 Mk2 / VM600 ABE042 system rack
- VM600Mk2 and VM600 system racks to house machinery protection and/or condition monitoring systems
- Robust aluminium construction
- Space for up to two RPS6U rack power supplies (AC-input and/or DC-input) to support rack power supply redundancy
- Space for up to 12 processing cards and power supply check relay
- Available in a version with mounting brackets positioned at the rear of the rack, and in a conformally coated version
-
-
- Out of Stock
- VM600 machinery protection system software (MPS1 and MPS2)
This software is discontinued (no longer under active development).
– VM600: no replacement.
– VM600Mk2: replaced by VibroSight® software.- MPS1 for configuration and MPS2 for configuration and trending
- Live data (MPS1 and MPS2) and historical data (MPS2 only)
- Graphical user interface
- Runs on Windows® Server 2003, Windows NT, Windows 2000, Windows XP, Windows Vista, Windows 7 and Windows 10 operating systems
- Available in 3 languages (English, French, German)
-