VM600 RLC16 relay card
- Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
- 16 SPDT relays
- Hardware configurable
- Relays configurable as normally energised (NE) or normally de-energised (NDE)
- All relay contacts are available on the screw-terminal connectors
Description
High-quality, high-reliability relay card for VM600 rack-based machinery monitoring systems. A RLC16 relay card is installed in the rear of a VM600 ABE04x rack.
Features
- Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
- 16 SPDT relays
- Hardware configurable
- Relays configurable as normally energised (NE) or normally de-energised (NDE)
- All relay contacts are available on the screw-terminal connectors
Additional information
| Monitoring system (application) | Machinery protection |
|---|---|
| VM600 system function | Machinery protection |
| VM600 system component | Relay card |
| VM600 component function | Relay |
| VM600 component and rack compatibility | ABE040, ABE042, ABE056 |
The following downloads are available for this product:
Related products
-
-
- Interface kit for machinery monitoring systems with buffered outputs
- Supports up to 25 channels, which can be used for dynamic channels or tachometer speed signals
- Interface kit consists of a module with a 25-pin D-sub connector input and screw terminal outputs, and a cable with 25-pin D-sub connectors
- DIN-rail mounting module with metal, movable mounting adaptor for flexible positioning
- Simplify the expansion of existing machinery monitoring systems that make their transducer input signals available as buffered outputs that can be shared with other systems
- Easy to implement and reliable signal interface for sharing signals with VM600 XMx16/XIO16T cards and VibroSmart® VSV300/VSB300 modules
-
-
-
- VM600 CPUR rack controller and communications interface card
- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
-
-
-
- VM600 CPUM modular CPU card
- VM600 CPUM/IOCN rack controller and communications interface card pair with support for Modbus RTU/TCP or PROFINET, and a front-panel display
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet or RS-232 serial connection to a computer running the VM600 MPSx software
- Front-panel display for visualisation of monitored outputs and alarm limits from protection cards
- Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUM) security
- VM600 system event and measurement event logs available via the VM600 MPSx software
-
-
-
- VM600 XIO16T input/output module for XMx16 modules
- Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
- Differential signal input per dynamic channel and tachometer channel
- Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
-
