VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
This product is no longer available for purchase. Please use the enquiry button only if you require support, otherwise please select the product below.
Description
These cards are discontinued with spares no longer available.
Input/output card for VM600 CPUM modular CPU card.
The VM600 CPUM and IOCN modular CPU card and input/output card is a rack controller and communications interface card pair that acts as a system controller and data communications gateway for a VM600 rack-based machinery protection system (MPS) and/or condition monitoring system (CMS) from Meggitt’s Vibro-Meter® product line.
Features
- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
Additional information
| Monitoring system (application) | Machinery protection, condition monitoring, combustion monitoring |
|---|---|
| VM600 system function | Common |
| VM600 system component | Interface (input/output) card |
| VM600 component function | Rack controller and communications interface |
| VM600 component and rack compatibility | ABE040, ABE042 |
| VM600 communications interfaces | Modbus RTU/TCP or PROFINET |
| VM600 rack alarm reset (AR) | Yes |
| VM600 MPS rack (CPUx) security | Yes |
| VM600 event logs | System event and measurement event logs (up to 10000) |
| VM600 output relays | 0 |
The following downloads are available for this product:
Related products
-
- Out of Stock
- VM600 CPUM modular CPU card
These cards are discontinued with spares no longer available. Please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
-
-
- Out of Stock
- VM600 CPUR rack controller and communications interface card
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
-
-
- Out of Stock
- VM600 IOC4T input/output card for MPC4 cards
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.- Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
- Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
- Differential buffered (raw) transducer output per dynamic channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
- 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
-
-
- Out of Stock
- VM600 IOCR input/output card for CPUR card
These cards are discontinued with some spares available, please see below for an updated alternative.
– VM600: there is no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- Input/output (interface) card for CPUR card
-