APF202 24 VDC 5 A power supply with Ex certification
- AC or high-voltage DC input and 24 VDC output
- Compact and robust design with status indictators (DC OK LED and status relay) and removable screw-terminal connectors
- DIN-rail mounting
- Up to ten APF202 power supplies can be connected in parallel in order to support power supply redundancy and/or provide more output current
- Certified for use in potentially explosive atmospheres
Description
24 VDC 5 A power supply with Ex certification, for use with Vibro-Meter’s VM600 rack-based and VibroSmart distributed monitoring system.
The APF202 is a high-performance 24 VDC 5 A power supply with Ex certification for use in industrial applications such as machinery monitoring.
A single APF202 power supply can be used to power any equipment requiring a 24 VDC up to 5 A (120 W), for example, external hardware such as GSI12x galvanic separation units or VibroSmart® devices. Up to ten APF202 power supplies can be connected in parallel in order to increase performance.
The APF202 is a compact and robust switched-mode power supply that works with either AC or DC inputs. It includes a front-panel LED (ON/Fail) to indicate the status of the power supply locally and a relay that can be used to monitor the status of the power supply remotely.
The APF202 is DIN-rail mounting and is typically installed in a cubicle containing other equipment such as VM600 and/or VibroSmart® monitoring systems.
In addition, the APF202 is Ex certified so it is also suitable for use in environments characterised by hazardous areas (potentially explosive atmospheres).
Features
- AC or high-voltage DC input and 24 VDC output
- Compact and robust design with status indictators (DC OK LED and status relay) and removable screw-terminal connectors
- DIN-rail mounting
- Up to ten APF202 power supplies can be connected in parallel in order to support power supply redundancy and/or provide more output current
- Certified for use in potentially explosive atmospheres
Additional information
| Input voltage | 85 to 277 VAC or 48 to 410 VDC |
|---|---|
| Output voltage | 24 VDC |
| Output current | 5 A |
| Output ripple | <50 mVPEAK-TO-PEAK |
| Load regulation | ±1% |
| Efficiency | 91% typ. |
| Output protection | Output short-circuit protection, output reverse-voltage protection, over-heating protection |
| Operating temperature range | −40 to 158 °F | −40 to 70 °C |
| Protection rating | IP20 |
| Hazardous area certifications | Ex ec nC |
The following downloads are available for this product:
- APF202 24 VDC 5 A power supply with Ex certification data sheet
- EPS 12 ATEX 1424 X Ex certificate (Europe) – APF20x
- TPS 18 ATEX 033299 0431 X Ex certificate (Europe) – APF202
- IECEx TPS 18.0009X Ex certificate (International) – APF202
- cCSAus 2148800 Ex certificate (North America) – APF20x
- UL E470829 Ex certificate (North America) – APF202
Related products
-
-
- AE119 housing expansion probe
- Designed for the long-term measurement of housing expansion in extreme environments, such as gas turbines and steam turbines
- 50 or 100 mm measurement range
- 0 to 80 °C (32 to 176 °F) operating temperature, IP54 protection rating
- Integrated electronics
- Current loop output (4 to 20 mA) for signal transmission over long distances
-
-
-
- PA151 probe mounting adaptor
- Removable probe housing and probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Sealed die-cast polyester housing and stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 100 °C temperature, IP65 protection rating
- Certified for use in potentially explosive atmospheres
-
-
-
- PA152 probe mounting adaptor
- Probe housing and probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Sealed die-cast aluminium housing and stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 200 °C temperature, IP65 protection rating
-
-
-
- CV214 velocity transducer
- Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
- Wide frequency response: 10 to 1000 Hz
- Temperature range: −29 to 121 °C
- Voltage output (20 mV/mm/s)
- Certified for use in potentially explosive atmospheres
-