ILS730 signal conditioner
- Signal conditioning for the LS120 air-gap sensor
- Enhanced filtering of noise and spikes induced by high excitation currents
- Voltage outputs: minimum gap, rotor profile and pole profile
- Configurable current loop output: minimum gap, rotor profile or pole profile
- Current output for signal transmission over long distances and voltage outputs for signal transmission over medium distances
Description
Signal conditioner for use with air-gap sensors (LS).
The ILS730 signal conditioner is a high-quality, high-reliability conditioner for use with the LS120 air-gap sensors.
It is configurable (current output, total system length, installation), and provides three voltage outputs (pole profile, rotor profile and minimum gap) and one current output for transmission of any one of the three signals over longer distances.
The minimum gap signal provides the minimum air gap value for all poles of the rotor (without any post-processing), and is typically connected directly to a machinery monitoring system for simple and reliable protection.
The ILS730 signal conditioner is designed and built for long-term use in harsh environments.
Features
- Signal conditioning for the LS120 air-gap sensor
- Enhanced filtering of noise and spikes induced by high excitation currents
- Voltage outputs: minimum gap, rotor profile and pole profile
- Configurable current loop output: minimum gap, rotor profile or pole profile
- Current output for signal transmission over long distances and voltage outputs for signal transmission over medium distances
Additional information
| Output type | Voltages (three) and current loop (one) |
|---|---|
| Measurement system | LS air gap |
| Sensor | LS120 air-gap sensor |
| Sensitivity | 320 mV/mm or 512 μA/mm |
| Frequency range | DC to 1000 Hz |
| Linearity | ≤±5% of full scale |
| Total measurement system length | 16.4 or 32.8 ft | 5 or 10 m |
| Operating temperature range | −13 to 158 °F | −25 to 70 °C |
| Protection rating | IP40 |
The following downloads are available for this product:
Related products
-
-
- CP235 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- Very high sensitivity: 750 pC/bar
- High operating temperature: up to 520 °C
- Available in different integral mineral-insulated (MI) cable lengths, terminated with a high-temperature connector
- Certified for use in potentially explosive atmospheres
-
-
-
- CP103 piezoelectric pressure transducer
- Designed for the long-term measurement of pressure pulsation in extreme environments, such as gas turbine combustors
- High sensitivity: 232 pC/bar
- Very high operating temperature: up to 650 °C
- Available in different integral mineral-insulated (MI) cable lengths, terminated with either a high-temperature connector or a LEMO connector
- Certified for use in potentially explosive atmospheres
-
-
-
- TQ401 proximity sensor
- Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
- 2 mm measurement range (Ø5 mm sensor)
- −40 to 180 °C operating temperature, IP68 protection rating
- 0.5, 1.0, 1.5, 2.0 or 5.0 m integral coaxial cable.
- Certified for use in potentially explosive atmospheres
-
-
-
- PA153 probe mounting adaptor
- Probe adaptor rod to support the external mounting of a TQ912 proximity sensor
- Stainless steel adaptor rod
- Easier probe installation and gap adjustment with adaptor rod lengths from 50 to 800 mm (mounting position adjustable to ±10 mm)
- −40 to 200 °C temperature, IP65 protection rating
-