Description
Rack power supplies for VM600Mk2/ VM600 systems
Key features
- AC-input version (115/230 VAC or 220 VDC) and DC-input versions (24 VDC and 110 VDC)
- High-power, high-performance, high-efficiency design with status indicator LEDs (IN, +5V, +12V and −12V)
- Over-voltage, short-circuit and overload protection
- One RPS6U rack power supply powers a full rack of modules (cards)
- Two RPS6U rack power supplies enable rack power supply redundancy
Additional information
| Monitoring system (application) | Machinery protection, condition monitoring, combustion monitoring |
|---|---|
| VM600 system function | Common |
| VM600 system component | Rack power supply |
| VM600 component function | Power supply |
| VM600 component and rack compatibility | ABE040, ABE042 |
The following downloads are available for this product:
Related products
-
-
- VM600 Mk2 / VM600 ASPS auxiliary sensor power supply
- Sensor (sensors / measurement chains) power supply for VM600Mk2/VM600 systems
- AC-input version (115/230 VAC)
- Two independent 24 VDC 1.1 A outputs
- Short-circuit protection
- Internal redundancy (two AC-DC converters per output) for high availability
-
-
- Out of Stock
- VM600 IRC4 intelligent relay card
This card is discontinued with spares no longer available.
– VM600: no replacement.
– VM600Mk2: no replacement.- Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
- 8 relays configurable as 8 SPDT or 4 DPDT
- Fully software configurable using the IRC4 Configurator software
- Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
- All relay contacts are available on the screw-terminal connectors
-
-
-
- VM600 Mk2 / VM600 ABE056 slimline rack
- VM600Mk2 and VM600 slimline racks to house a machinery protection system or a condition monitoring system
- Robust metal construction
- Integral rack power supply (AC-input or DC-input)
- Space for 1 processing card and power supply check relay
- Available in AC-input and DC-input versions
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-