VM600 Mk2 / VM600 19″ fan trays and airflow deflector
- 19″ fan trays with a standard height of 1U
- 3 fan (half-size) and 6 fan (full-size) versions
- AC-input (230 VAC) and DC-input versions (24 VDC)
- Fan speed control (external sensor), function monitoring and status indicator options
- 19″ airflow deflector with a height of 1U
Description
The VM600Mk2/VM600 19″ fan trays and airflow deflector are used to help cool VM600Mk2/VM600 systems, typically ABE04x system racks, and other electronic/electrical equipment in a 19″ cabinet or equivalent enclosure.
A number of different versions of 19″ fan tray are available, providing a range of cooling capabilities (airflow capacity/volume), functionality (speed control and function monitoring with status indicators), and operation with different power supplies (230 VAC or 24 VDC). A 19″ airflow deflector is available for use with the 19″ fan trays, as required.
Features
- 19″ fan trays with a standard height of 1U
- 3 fan (half-size) and 6 fan (full-size) versions
- AC-input (230 VAC) and DC-input versions (24 VDC)
- Fan speed control (external sensor), function monitoring and status indicator options
- 19″ airflow deflector with a height of 1U
The following downloads are available for this product:
VM600 Mk2 / VM600 19″ fan trays and airflow deflector data sheet
Related products
-
- Out of Stock
- VM600 machinery protection system software (MPS1 and MPS2)
This software is discontinued (no longer under active development).
– VM600: no replacement.
– VM600Mk2: replaced by VibroSight® software.- MPS1 for configuration and MPS2 for configuration and trending
- Live data (MPS1 and MPS2) and historical data (MPS2 only)
- Graphical user interface
- Runs on Windows® Server 2003, Windows NT, Windows 2000, Windows XP, Windows Vista, Windows 7 and Windows 10 operating systems
- Available in 3 languages (English, French, German)
-
-
- Out of Stock
- VM600 CPUR rack controller and communications interface card
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
-
-
-
- VM600 XMC16 condition monitoring module for combustion
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- 16 dynamic channels and 4 tachometer channels
- Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMC16)
- Simultaneous data acquisition on all channels with asynchronous (fixed frequency) or synchronous (order tracked) sampling
- 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 500 ms
- Designed for operation with the VibroSight® software
-
-
-
- VM600Mk2 RPS6U rack power supplies
Rack power supplies for VM600Mk2
-