Capacitive-coupling adaptor for VM600 IOC4T card
- 4 individually configurable channels for use with IOC4T buffered (raw) transducer outputs
- AC couples a channel’s buffered (raw) transducer output signal and removes the DC component
- 1 μF series capacitor or straight-through connection per channel
- Reduces external circuitry and wiring when the buffered (raw) transducer outputs of an IOC4T card are connected to test and measurement equipment
Description
High-quality, high-reliability capacitive-coupling adaptor for the MPC4/IOC4T card pairs used by VM600 rack-based machinery monitoring systems. The IOC4T capacitive-coupling adaptor supports 4 channels, which are buffered “raw” transducer output signals. An IOC4T capacitive-coupling adaptor is installed into a screw-terminal socket (J3) of an IOC4T card in the rear of a VM600 ABE04x rack.
Features
- 4 individually configurable channels for use with IOC4T buffered (raw) transducer outputs
- AC couples a channel’s buffered (raw) transducer output signal and removes the DC component
- 1 μF series capacitor or straight-through connection per channel
- Reduces external circuitry and wiring when the buffered (raw) transducer outputs of an IOC4T card are connected to test and measurement equipment
Additional information
| Monitoring system (application) | Machinery protection |
|---|---|
| VM600 system function | Accessory |
| VM600 system component | Interface adaptor |
| VM600 component function | Signal interface |
The following downloads are available for this product:
Related products
-
-
- VM600 XIO16T input/output module for XMx16 modules
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
- Differential signal input per dynamic channel and tachometer channel
- Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight
-
-
- Out of Stock
- VM600 RLC16 relay card
This card is being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by RLC16Mk2.- Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
- 16 SPDT relays
- Hardware configurable
- Relays configurable as normally energised (NE) or normally de-energised (NDE)
- All relay contacts are available on the screw-terminal connectors
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-
-
-
- Voltage-drop adaptor for VM600 IOC4T card
- 4 individually configurable channels for use with IOC4T dynamic channel and tachometer channel inputs
- Reduces a channel’s sensor power supply output voltage
- −27 V input to −24 V output, −27 V input to −18 V output or straight-through connection per channel
- Reduces external circuitry and wiring when IOC4T sensor power supply outputs are connected to third-party front ends
-