Related products

• 

  • 
  • LS120 air-gap sensor
  • • Designed for the contactless measurement of the air-gap between rotor and stator in hydroelectric generators, and large alternators and motors
    • 5 to 30 mm linear measurement range (1.875 to 33.125 mm)
    • −15 to 125 °C operating temperature
    • Withstands magnetic fields up to 1.5 tesla
    • Integral cable length of 5 or 10 m
  Compare
• 

  • 
  • VE210 velocity transducer
  • • Designed for the long-term measurement of vibration in harsh environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
    • Very low frequency response: down to 0.5 Hz
    • Temperature range: −25 to 80 °C
    • Current output (50 µA/mm/s) for signal transmission over long distances or voltage output (50 mV/mm/s) for signal transmission over medium distances
    • Any mounting orientation
  Compare
• 

  • 
  • TQ423 proximity sensor
  • • Designed for the contactless measurement of relative vibration and axial displacement in turbines, compressors, pumps and fans
    • 12 mm measurement range (Ø25 mm)
    • −25 to 140 °C operating temperature, IP68 protection rating, 100 bar pressure rating
    • 1.0, 5.0 or 10.0 m integral coaxial cable
    • Certified for use in potentially explosive atmospheres
  Compare
• 

  • 
  • CA280 piezoelectric accelerometer

  • Designed for the long-term measurement of vibration in extreme environments, such as gas turbines, gearboxes and compressors

    • Operating temperature: −60 to 260 °C
    • Frequency response: 0.5 to 6000 Hz
    • Available as a sensor only (no integral cable) or with an integral soft-line cable with a flexible stainless steel hose
    • Certified for use in potentially explosive atmospheres
  Compare