-
- Out of Stock
- VM600 AMC8 analog monitoring card
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replacement module available 2024-2025.- 8 temperature or process monitoring channels
- 1 processed output per channel and 1 processed output per multi-channel (4 per AMC8)
- Highly configurable card supports temperature monitoring using thermocouples and/or RTDs, and process monitoring using current and/or voltage inputs
- Highly integrated card pair (with IOC8T) includes DC outputs, relays and serial communications interfaces
- Designed for operation with the VM600 MPSx software
-
-
- Out of Stock
- VM600 CPUM modular CPU card
These cards are discontinued with spares no longer available. Please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.
-
-
- Out of Stock
- VM600 CPUR rack controller and communications interface card
These cards are discontinued with some spares available.
– VM600: no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- VM600 CPUR/IOCR rack controller and communications interface card pair with support for Modbus RTU/TCP and card pair redundancy
- “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Rack controller and communications redundancy with two CPUR/IOCR card pairs: Master (active) and Inactive (redundant)
- Five output relays to signal system statuses and alarms
- VM600 system event and measurement event logs available via VibroSight® software
-
-
- VM600 CPUR2 rack controller and communications interface card
- VM600 CPUR2/IOCR2 rack controller and communications interface card pair with support for Modbus TCP and PROFIBUS DP
- “One-Shot” configuration management of protection cards (MPC4) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software
- Mathematical processing of data to be shared via fieldbus and card pair status (health) information via fieldbus
- Common alarm reset (AR) for protection cards and VM600 MPS rack (CPUR2) security with a removable key
- Two output relays to signal system statuses and alarms
-
- Out of Stock
- VM600 IOC4T input/output card for MPC4 cards
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.- Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
- Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
- Differential buffered (raw) transducer output per dynamic channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
- 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
-
-
- Out of Stock
- VM600 IOC8T input/output card for AMC8 card
These cards are being phased out with spares available until 2027.
VM600: no replacement.
VM600Mk2: replacement module available 2024-2025.- Input/output (interface) card for an AMC8 card – supports 8 temperature or process monitoring channels
- Configurable signal input with current source output per monitoring channel
- DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per monitoring channel
- 4 configurable relays with three contacts available per relay, and alarm reset (AR) and danger bypass (DB) control inputs
-
-
- Out of Stock
- VM600 IOCN input/output card for CPUM card
These cards are discontinued with spares no longer available, please see below for an updated alternative.
– VM600: replaced by CPUR2 and IOCR2.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2.- Input/output (interface) card for CPUM card
- One primary Ethernet connector (8P8C (RJ45)) for communication with the VM600 MPSx software and/or Modbus TCP and/or PROFINET communications
- One secondary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communications
- One primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection
- Two pairs of serial connectors (6P6C (RJ11/RJ25)) that can be used to configure multi-drop RS-485 networks of VM600 racks
-
-
- Out of Stock
- VM600 IOCR input/output card for CPUR card
These cards are discontinued with some spares available, please see below for an updated alternative.
– VM600: there is no replacement.
– VM600Mk2: replaced by CPUMMk2 + IOCNMk2 with redundancy (via firmware upgrade) available 2024.- Input/output (interface) card for CPUR card
-
-
- VM600 IOCR2 input/output card for CPUR2 card
- Input/output (interface) card for CPUR card
-
- Out of Stock
- VM600 IRC4 intelligent relay card
This card is discontinued with spares no longer available.
– VM600: no replacement.
– VM600Mk2: no replacement.- Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
- 8 relays configurable as 8 SPDT or 4 DPDT
- Fully software configurable using the IRC4 Configurator software
- Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
- All relay contacts are available on the screw-terminal connectors
-
-
- Out of Stock
- VM600 machinery protection system software (MPS1 and MPS2)
This software is discontinued (no longer under active development).
– VM600: no replacement.
– VM600Mk2: replaced by VibroSight® software.- MPS1 for configuration and MPS2 for configuration and trending
- Live data (MPS1 and MPS2) and historical data (MPS2 only)
- Graphical user interface
- Runs on Windows® Server 2003, Windows NT, Windows 2000, Windows XP, Windows Vista, Windows 7 and Windows 10 operating systems
- Available in 3 languages (English, French, German)
-
-
- Out of Stock
- VM600 MPC4 machinery protection card
These cards are being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by MPC4Mk2 + IOC4Mk2.- 4 dynamic channels and 2 tachometer channels
- 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4), 1 processed output per tacho channel
- Highly configurable card supports all measurements required by machinery protection applications, such as relative and/or absolute vibration
- Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
- Designed for operation with the VM600 MPSx software
-
-
- VM600 MPC4SIL machinery protection card
- 4 dynamic channels
- 2 processed outputs per dynamic channel and 1 processed output per dual-channel (2 per MPC4)
- Highly configurable card supports a subset of SIL 1 approved measurements for machinery protection, including relative and/or absolute vibration
- Highly integrated card pair (with IOC4T) includes sensor power supplies, buffered outputs, DC outputs, relays and serial communications interfaces
- Designed for operation with the VM600 MPSx software
-
- Out of Stock
- VM600 RLC16 relay card
This card is being phased out with spares available until 2027.
– VM600: no replacement.
– VM600Mk2: replaced by RLC16Mk2.- Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
- 16 SPDT relays
- Hardware configurable
- Relays configurable as normally energised (NE) or normally de-energised (NDE)
- All relay contacts are available on the screw-terminal connectors
-
-
- VM600 XIO16T input/output module for XMx16 modules
These cards are still available with phase out planned for 2025.
– VM600Mk2: replaced by VM600Mk2 XMx16 + XIO16T.Note: VM600 and VM600Mk2 versions of the XMx16 + XIO16T are the same, except for different Mk2 branding cards.
- Input/output (interface) module for the XMV16 and XMC16 modules – supporting 16 dynamic channels and 4 tachometer channels
- Differential signal input per dynamic channel and tachometer channel
- Designed for operation with the VibroSight® software: one Ethernet connector (8P8C (RJ45)) for communication with VibroSight